User manual

Locomotive decoders of the series 30 plus English
Shunting light
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Shunting light 131 0 ... 255 (0) for F0f 1
for F0r 2
for AUX1 4
for AUX2 8
for AUX3 16
for AUX4 32
to be switched with F3 64
to be switched with F4 128
Example: For F0r and AUX1 shunting light, to be switched with F4:
à input value: 134 (= 2 + 4 + 128)
Kick function
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Extended
kickfunction
160 0 ... 252 (0) for AUX1 4
for AUX2 8
for AUX3 16
for AUX4 32
for AUX5 64
for AUX6 128
When setting the extended kick function for an output, the motor is supplied with power as
long as the kick function is switched on.
Example of use: When switching an output via the extended kick function the locomotive runs
automatically a little bit nearer to the carriage (in order to ease the burden from the
coupling). Afterwards the electric coupling is released via the kick function and the locomotive
moves away automatically from the uncoupled carriage.
Voltage at
extended kick
function
161 0 ... 255 (10) = Voltage applied to the motor
when switching an output via
the extended kick function.
Kicking time
for direction
"forwards" /
"backwards"
162
163
0 ... 255 (32) 0 = short
255 = long
Page 71