User manual

Locomotive decoders of the series 30 plus English
Basic settings
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
RailCom
settings
28 0,1,2,3,128,
129,130,131
(131)
no feedback 0
channel 1 on 1
channel 2 on 2
RailComPlus on 128
Configuration
data 1
29 0 ... 64 (14) Direction "Standard" 0
Reverse direction 1
14 speed levels 0
28 or 128 speed levels 2
Analoge recognition off 0
Analoge recognition on 4
RailCom off 0
RailCom on 8
Linear velocity characteristic 0
Alternat. velocity charact. 16
Basic addresses 0
Not for MM mode: Extended addresses 32
Example: CV#29 = 0. à Direction = "Standard". 14 speed levels. Basic addresses. Automatic
analogue recognition = "off". RailCom = "off".
Example: CV#29 = 46. à Direction = "Standard". 28 or 128 speed levels in DCC-mode. Automatic
analogue recognition = "on". RailCom = "on". Extended addresses.
Tip: If the use of extended addresses is activated in CV#29, the decoder does not react to
signals in Motorola format!
Configuration
data 2
49 0 ... 255
(73)
Load control inactive 0
Lastregelung active 1
Shunting gear at F1 2
Shunting gear at F2 4
Shunting gear at F3 8
Shunting gear at F4 16
Acceleration and brake delay
to be switched at F3 32
Acceleration and brake delay
to be switched at F4 64
Page 61