User manual

English Locomotive decoders of the series 30 plus
Checking the package contents
Please make sure that your package contains:
 one or five locomotive decoders, depending on the version with or
without soldered connecting wires resp. with or without interface
connector;
 LD-G-31 plus: one or five buffer electrolytic capacitors (100 µF / 35 V);
 LD-G-33 plus, LD-G-34 plus, LD-G-36 plus: one or five buffer
electrolytic capacitors (220 µF / 35 V);
 LD-G-31 plus, LD-G-33 plus, LD-G-34 plus: one or five suppression
chokes (470 µH / >90mA);
 a CD (containing the manual, Software "POM-Updater.exe" and
further information).
N.B. For technical reasons it is possible that the PCB is not completely
inserted. This is not a fault.
Available versions
Connecting wires /
Interface
LD-G-31
plus
LD-G-33
plus
LD-G-34
plus
LD-G-36
plus
without wires *
1
+ + + +
with wires *
1
– – + –
according to NEM 650*
1
8-pole
(NEM 652)
8-pole
(NEM 652)
8-pole
(NEM 652)
8-pole
(NEM 652)
according to NEM 658 PluX12 PluX22 – PluX22
according to NEM 660 – 21MTC – 21MTC
similar to NEM 660 – 21-pole*
2
(4 amplified
outputs)
– 21-pole
(4 amplified
outputs)
*
1
connections according to version with PluX interface
*
2
in preparation (status 11/2015)
Page 6