User manual

Locomotive decoders of the series 30 plus English
Information / Read only
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Version 7 ---
Read only in DCC format!
Manufacturer 8 --- (62)
Read only in DCC format!
Index for
higher CV
pages
31 --- (0) Set firmly.
For reading out RailCom
relevant data. Only for DCC
format.
32 --- (255)
Auxiliary functions
Name of CVs /
registers
No. Input value
(Default)
Remarks and Tips
Reset 8 0 ... 255 Any input value restores the
settings in state of delivery.
Auxiliary
register for
programming
with central
units with
restricted
input options
26
30
(0)
(0)
Allows to enter values > 80
resp. 99 with central units
allowing to entries from 0 or 1
to 80 or 99.
Number of CV
Value of CV
In CV #26 and 30 you preset the hundred and the tenner for the CV number
and CV value. In order to program a CV number > 80 or 99 you have to
program the desired "one" value into the CV with the corresponding "one"
number. Instead of a "0" you can enter "10" (with those central units not
allowing to enter a "0"). Examples:
CV#137 value 245→
1. CV#26 =13 (1= the 100 | 3 =10ner)
2. CV#30= 24 (2= the 100 | 4 = 10ner)
3 CV#7 = 5 (7 = the one of the CV
number, 5 = the one of the CV value)
CV#120 value 230→
1. CV#26 =12 (1= the 100 | 2 =10ner)
2. CV#30= 23 (2= the 100 | 3 = 10ner)
3 CV#10 = 0 or 10 (10 for value 0 of the one of
the CV number, 0 or 10 for value 0 of the one of
the CV value)
Page 59