User manual

English Locomotive decoders of the series 30 plus
Front
side
Colour
of wire
Connection to
(for use of settings in state of delivery)
X7 yellow F0r = lighting backward motion (function key F0)
X8
white
F0f = lighting forward motion (function key F0)
X9 brown Loudspeaker connection A (signal / -)
X10 brown Loudspeaker connection B (+)
X11 --- Index, not occupied
X12 --- Internal decoder voltage VCC: not intended for
external connection
X13 *
3
white
AUX3 (function key F5) *
3
X14 violet AUX2 (function key F2)
X15 green AUX1 (function key F1)
X16 blue RL = common return conductor for all function
outputs (+); Supply voltage for Hall sensors
X17 *
3
white
AUX5 (function key F10) *
3
X18 grey Motor connection 2 (minus)
X19 orange Motor connection 1 (plus)
X20 brown Earth connection for reed contacts / Hall sensors
X21 black Left current collector (or vehicle ground)
X22 red Right current collector (or slider)
Back
side
Colour
of wire
Connection to
(for use of settings in state of delivery)
X23 blue Positive pole (+) of buffer capacitor
X24 brown Negative pole (-) of buffer capacitor
X25 orange Servo output
X26 brown Earth connection for servo
*
3
Max. current 21 MTC (NEM 660) 21-pole
AUX3 / AUX4 10 mA (not boosted) 500 mA (boosted)
AUX5 / AUX6 10 mA (not boosted) 10 mA (not boosted)
Page 34