User manual

!
Locomotive decoders of the series 30 plus English
5. Technical specifications
Data format DCC and MM
Feedback log RailCom and RailCom plus
Supply voltage Digital voltage: 12-24 V
LD-G-31 plus: 12-18 V
Analogue voltage: max. 18 V
Current consumption
(without connected loads) max. 40 mA
Output for servo (except LD-G-31 plus)
max. current for servo output
1
5 mA
Output for loudspeaker | Playback
Impedance
Rated load-carrying capacity
1 | mono
> 8 Ohm
> 0,1 Watt
Number of switching inputs 2
Connection for buffer capacitor
Capacity:
- for LD-G-31 plus
- for LD-G-33, LD-G-34, LD-G-36 plus
Proof voltage
- in analogue a.c. layouts
1
100 to 470 µF
220 to 1.000 µF
> 25 V
> 35 V
Interfaces
depending on the decoder type and the version
according to NEM 652, 658,
660 or 21-pole (similar to NEM 660);
SUSI (except LD-G-31)
Protected to IP 00
Ambient temperature in use 0 ... +60 °C
Ambient temperature in storage -10 ... +80 °C
Comparative humidity allowed max. 85 %
Page 25