Instructions

tams elektronik
English LD-G-32.2 and LD-W-32.2
Setting the driving of the motor
Name of CVs /
registers
CV-
no.
Rg-
no.
Input value
(Default)
Remarks and Tips
Starting
voltage
(Starting
velocity)
2 47 0 … 255
(LD-G-32.2: 5)
(LD-W-32.2: 50)
= The voltage to be output
to the motor at speed level
1.
0 = 0 Volt
255 = max. voltage
Acceleration
rate
3 44 0 … 255
(LD-G-32.2 : 20)
(LD-W-32.2: 16)
= Length of the delay
before the switching to the
next higher / lower speed
level when the locomotive is
accelerating / braking.The
delay is calculated as
follows:
(value of CV 3) x 0,9 sec. /
number of speed levels
Braking rate 4 45 0 … 255
(LD-G-32.2: 15)
(LD-W-32.2: 5)
Maximum
voltage
(maximum
velocity)
5 46 0 … 255
(0)
= The voltage to be output
to the motor at the highest
speed level.
2 = 0,8 % of the max.
voltage
255 = maximum voltage
Motor
frequency
(LD-W-32.2)
9 48 0, 1 (0) =Frequency controlling the
motor
480 Hz 0
60 Hz 0
Tip: In case that the locomotive´s driving characteristics are not satisfactory with the
standard setting of 480 Hz, the motor frequency of 60 Hz should be chosen.
Page 34