Instructions

tams elektronik
LD-G-32.2 and LD-W-32.2 English
Fig. 2: Connection of
an a.c. motor and the
power supply
Connecting accessories to the outputs
Disconnect any existing diodes in the leads to the lamps, otherwise the
lamps might not light. Connect the lamps and the accessories to the
function outputs of the decoder. If the lamp or the accessory is already
connected with one side to vehicle ground, the connection is complete.
If not, connect the second side of the lamp or the accessory to the
decoder´s common return conductor for all function outputs.
You find the factory (default) settings in the lists with the connector pin
assignments. You can assign the outputs to the function keys
voluntarily by setting the configuration variables.
Fig. 3: Examples for the
connection of accessories
and LEDs to the function
outputs
AUX2: parallel connection
of LEDs
AUX3: serial connection of
LEDs
AUX4: combined parallel
and serial connection of
LEDs
Page 23