Instructions

tams elektronik
English LD-G-32.2 and LD-W-32.2
4.6. Feedback with RailCom**
RailCom is a log for bi-directional communication in digital model
railway layouts controlled in DCC-format. It allows e.g. the feedback of
the address and the CV values from the decoder to the digital central
unit or to special receivers (so-called detectors). The decoders must be
designed to send the RailCom messages.
When so programmed, the locomotive decoders LD-G-32.2 and LD-W-
32.2 send (continuously) the (basic, extended or consist) address to the
detectors (so-called RailCom broadcast datagramm) and transfer a CV
message after a DCC CV read-out command.
Sending RailCom messages is only possible in layouts with a DCC signal
on the rails. It is not possible to use the RailCom-function in a pure
Motorola environment.
Page 16