Instructions

tams elektronik
LD-G-32.2 and LD-W-32.2 English
4.4. Releasing the functions
The function outputs can be released by pushing the function keys. The
mapping of the outputs to the function keys and the switching inputs is
arbritary. It is possible to assign several function keys and switching
inputs to one output.
Outputs DCC format MM format
AUX1 to AUX3 F0 to F12 F0 to F4 or
F5 to F9
(= F0 to F4 of a second
decoder address)
4.5. Automated processes
The control software in the locomotive decoder allows you to automate
procedures and to reduce complex processes to one keystroke.
Dimming depending on the velocity
You can automatically switch functions depending on the velocity when
reaching a speed level defined in a CV. You assign an individual voltage
to the function outputs for the ranges of speed levels underneath and
above the defined speed level. This allows for example to switch on and
off the high beam light, to control the cab light or to influence the
intensity of the steam output.
Shunting function
You can assign the shunting gear and the shunting light to the same funtion
key. That way you switch on the shunting light automatically when
switching into the shunting gear (and thus reducing the velocity).
Page 15