Instructions

tams elektronik
English LD-G-32.2 and LD-W-32.2
Emergency stop
It is possible to carry out an emergeny stop at a change of direction
automatically, when so programmed.
4.3. Function outputs
The decoder has function outputs, which are available to connect
optional accessories (e.g. lighting, smoke generator, sound module,
electric coupling). The accessories´ number and type to be connected
depends on the outputs´number and maximum current as well as on
the maximum total current of the special decoder (see section 5
"Technical specifications").
Effects of the function outputs
It is possible to set the following effects for the function outputs
individually:
 Switching on and off depending on the direction of travel.
 Flashing and double flashing. Both the frequency and the keying
ratio can be set. E.g. single and double flash lights or strobe lights.
 Dimming: Example of use: The electric bulbs of older vehicles made
for analogue operation can be dimmed and thus must not be
exchanged after the mounting of the decoder.
 Shunting light: You can program the outputs so that they are switched on
generally during shunting operation (to be switched with F3 or F4). The
dependence on the direction of travel will be nullified for these outputs
during shunting operation.
Page 14