Manual

tams elektronik
tams elektronik Power-Splitter
3. Connections
For the various connections are soldered on the board:
 2-pole tub plugs for connection to the track output of the central unit or the booster and to
the booster sections. Plug the connection cables into the corresponding plug-in connection
terminals (included in the delivery) and screw them tight (like a luster terminal). Then plug
the terminals into the tub connectors.
 2-pole pin connectors for connecting the short circuit feedback line and the emergency stop
button. Solder the connection cables to the corresponding socket connectors (included in
the scope of delivery) and plug them into the pin connectors.
Connections | 9