Manual

tams elektronik
tams elektronik Power-Splitter
1.3. Intended use
The Power-Splitter is intended for use in digital model railway layouts as specified in the
instructions. Any other use is not in accordance with the intended use and will result in the
loss of the warranty claim. Intended use also includes reading, understanding and following all
parts of the instructions. The Power-Splitter is not intended to be used by children under the
age of 14.
1.4. Safety instructions
Improper use and non-observance of the instructions can lead to incalculable hazards. Prevent
these dangers by carrying out the following measures:
 Only use the Power-Splitter in closed, clean and dry rooms. Avoid moisture and splash
water in the surrounding area. After condensation has formed, wait two hours for
acclimatisation before use.
 Disconnect the Power-Splitter from the booster / digital central unit before carrying out
wiring work.
 Heating of the Power-Splitter during operation is normal and harmless.
 Do not expose the Power-Splitter to high ambient temperatures or direct sunlight. Observe
the information on the maximum operating temperature in the technical data.
 Regularly check the operational safety of the module / unit, e.g. for damage to the
connection cables or damage to the housing.
 If you notice any damage or if malfunctions occur, disconnect the booster / digital central
unit immediately. Send in the Power-Splitter for inspection.
1.5. Care
Do not use any cleaning agents to clean your Power-Splitter. Only wipe the module or the
device dry. Disconnect the module / device from the booster or digital central unit before
cleaning.
Getting started | 5