Manual

tams elektronik
Booster B-6 tams elektronik
6. Operation
6.1. Operating and display elements
The Booster B-6 has a button with which you can trigger the following functions:
 switch the track voltage on and off independently of the control unit
 trigger a reset
 identify the B-6 via BiDiB with the PC control software (BiDiB-Identify)
The display on the front provides you with essential information during programming and
operation. In addition, the RGB LEDs built into the housing change colour, indicating the
operating status visibly from a distance.
6.1.1. Functions of the STOP-GO button
Function
Duration
Display
Colour of the
RGB LEDs
Switch on track voltage press briefly
0.0 | current power
consumption
green
Switch off track voltage press briefly St. red
Send BiDiB-Identify for
the B-6
(→ identification with the
PC control software)
press and hold until the
RGB LEDs flash blue.
To stop sending the signal, press
the button again until the RGB
LEDs light up green or red again.
blue
flashing
Perform reset
(restart without resetting
all settings to the default
values)
press and hold until the
blue flashing of the RGB
LEDs changes to a violet
rise and fall.
After the reset, the B-6
automatically switches back to
standard operation.
rE
blue
flashing
+ violet
rising and
falling
30 | Operation