Manual
Table Of Contents
- 1. Getting started
- 2. Your B-6
- 3. Conception of the digital layout
- 4. Connections
- 5. Settings / Configuration
- 6. Operation
- 7. Update
- 8. Checklist for troubleshooting and error correction
- 9. Technical data
- 10. Warranty, EU conformity & WEEE
tams elektronik
Booster B-6 tams elektronik
Version: 1.0 | Status: 04/2023
© Tams Elektronik GmbH
All rights reserved, in particular the right of reproduction, distribution and translation. Copies,
reproductions and alterations in any form require the written permission of Tams Elektronik
GmbH. We reserve the right to make technical changes.
Printing the manual
The formatting is optimised for double-sided printing. The standard page size is DIN A5. If
you prefer a larger display, printing on DIN A4 is recommended.
Notes on BiDiB
®
The BiDiB devices described in this manual comply with the standards of the BiDiB
specification (status: V0.7). The BiDiB specification has been published on: www.bidib.org.
BiDiB
®
is a registered trademark. Copyrights and trademarks to BiDiB are held by Wolfgang
Kufer, OpenDCC.de.
In order to increase the readability of this text, we have refrained from referring to it
whenever the term BiDiB is used.
** The asterisks
The asterisks indicate further products from the Tams Elektronik GmbH product range :
Power-Splitter | Item numbers 40-20106, 40-20107
Digital control unit MasterControl 2 (mc²) | Item numbers 40-30007, 40-30017
Digital control unit RedBox | Item numbers 40-20007 … 40-20067
Digital control unit MasterControl | Item number 40-10007
2 | Contents