User manual

tams elektronik
English Booster B-4
Function Value
for
CV#7
Settings / Remarks
Watchdog
Default value:
inactive
74 active
75 inactive
76 Change over into the programming mode.
When within 30 sec. a DCC points switching command is
set, the B-4 takes over the corresponding points address
to release the watchdog funtion.
Condition: Watchdog funtion = "active".
Limiting value
for short circuit
warning
Default value:
0 A
81 0 A Hint: The short circuit warning will
be sent, when the set interrupting
current less the value is exceeded.
Example:
Interrupting current = 3 A
set = 0,2 A
à limiting value for the short
circuit warning = 2,8 A
82 0,2 A
83 0,4 A
84 0,6 A
85 0,8 A
86 1,0 A
Autostarting
time after 5
short circuits
Default value:
60 sec.
100 = set autostarting time after a short circuit
101 10 Sekunden
102 20 Sekunden
103 30 Sekunden
... 40 - 80 Sekunden
109 90 Sekunden
Page 20