Instructions
Table Of Contents
- 1. Getting started
- 2. Commissioning
- 3. Your mc²
- 4. Connections
- 5. Configuring the system (Submenu "System")
- 6. Operation with the mc²
- 7. Updates
- 8. Checklist for troubleshooting
- 8.1. Heat generation
- 8.2. Automatic safety shutdown
- 8.3. Problems with the power supply
- 8.4. Problems with external input devices
- 8.5. Problems when programming and controlling vehicles
- 8.6. Problems when switching points and other accessories
- 8.7. Problems with s88 modules
- 8.8. Problems with the software update
- 8.9. Technical hotline
- 8.10. Repairs
- 9. Technical data
- 10. Warranty, EC Conformity & WEEE
tams elektronik
Environment
For use in closed rooms
Note: To allow unhindered air exchange and to predect the unit from
overheating, a distance of at least 20 cm must be maintained between the side
surfaces, the top surfaces and the rear surfaces to ambient surfaces.
Ambient temperature during
operation
-30 ~ + 70 °C
Permissible relative humidity
during operation
20 ~ 90% (non-condensing)
Ambient temperature during
storage
- 40 ~ + 85 °C
Permissible relative
humidityduring storage
10 ~ 95% (non-condensing)
Connections
Unit connection Power supply connector 4-pole with snap lock, R7B series
Mains connection Mains cable socket 2-pole, IEC 320-C8
Miscellaneous
Dimensions (approx.)
175 x 72 x 35 mm
Weight (approx.)
660 g
Length of connection cable
1,200 mm + 50 mm
Technical data | 9.5