Instructions
Table Of Contents
- 1. Getting started
- 2. Commissioning
- 3. Your mc²
- 4. Connections
- 5. Configuring the system (Submenu "System")
- 6. Operation with the mc²
- 7. Updates
- 8. Checklist for troubleshooting
- 8.1. Heat generation
- 8.2. Automatic safety shutdown
- 8.3. Problems with the power supply
- 8.4. Problems with external input devices
- 8.5. Problems when programming and controlling vehicles
- 8.6. Problems when switching points and other accessories
- 8.7. Problems with s88 modules
- 8.8. Problems with the software update
- 8.9. Technical hotline
- 8.10. Repairs
- 9. Technical data
- 10. Warranty, EC Conformity & WEEE
tams elektronik
6.3.4. SwitchControl.vi
The SwitchControl.vi allows you to switch accessory decoders up to turnout address 2048. To
switch to the next 16-number block, click on or . To skip several blocks of 16
numbers, use the double arrows.
You can switch between displaying the speed controller on the left or right side of the user
interface by clicking on the field ..
From FunctionControl.vi you can go directly to FunctionControl.vi to control the last vehicle
called up or go back to HandControl.vi.
Operation with the mc² | 6.13
Speed
controller
to the
right side
Current
speed level
Digital
format
Vehicle
name
Speed
controller
Decoder
address
Turnout keys
1 … 2.048
Direction
change-over
switch
Change to
HandControl.vi
Change to
FunctionControl.vi
Full screen mode on/off
Change
block of 16
Function
key F0