Instructions

tams elektronik
6.3.2. FunctionControl.vi
With the FunctionControl.vi you can control the vehicle decoder that you have previously
called up with the help of the HandControl.vi. While you can only switch the functions F0 to F9
on and off with the HandControl.vi, the FunctionControl.vi allows you to switch the functions
F0 to F32. If you have assigned icons to the functions, these are displayed instead of the
function numbers.
You can switch between displaying the speed controller on the left or right side of the user
interface by clicking on the field .
From FunctionControl.vi you can switch directly to SwitchControl.vi to switch accessory
decoders or go back to HandControl.vi.
Operation with the mc² | 6.11
Speed controller
to the left side
Current
speed level
Digital
format
Vehicle
name
Speed
controller
Decoder
address
Function keys
(F)1, 2, 3…9, 0
Direction
change-over
switch
Switched on
functions
0, 5, 10, 19, 20
Change to
HandControl.vi
Change to
SwitchControl.vi
Full screen mode on/off