Instructions
Table Of Contents
- 1. Getting started
- 2. Commissioning
- 3. Your mc²
- 4. Connections
- 5. Configuring the system (Submenu "System")
- 6. Operation with the mc²
- 7. Updates
- 8. Checklist for troubleshooting
- 8.1. Heat generation
- 8.2. Automatic safety shutdown
- 8.3. Problems with the power supply
- 8.4. Problems with external input devices
- 8.5. Problems when programming and controlling vehicles
- 8.6. Problems when switching points and other accessories
- 8.7. Problems with s88 modules
- 8.8. Problems with the software update
- 8.9. Technical hotline
- 8.10. Repairs
- 9. Technical data
- 10. Warranty, EC Conformity & WEEE
tams elektronik
Shown
in the display
Colour of the
RGB LEDs
Meaning
Fr
red
The configuration is deleted and the mc² is
reset to the factory settings.
1...99 or ---
violet
circulating
An update is being carried out. The digits
indicate the progress in %. During writing, the
progress display is interrupted.
[ ]
blue
flashing
+ white
swelling
The update is being processed and completed.
E + digit
no colour
change
An internal error has occurred. Please make a
note of the digit(s) and contact the hotline.
Dots flash
alternately
violet
The recovery software has been started.
→ Section 7
Operation with the mc² | 6.3