Instructions
Table Of Contents
- 1. Getting started
- 2. Commissioning
- 3. Your mc²
- 4. Connections
- 5. Configuring the system (Submenu "System")
- 6. Operation with the mc²
- 7. Updates
- 8. Checklist for troubleshooting
- 8.1. Heat generation
- 8.2. Automatic safety shutdown
- 8.3. Problems with the power supply
- 8.4. Problems with external input devices
- 8.5. Problems when programming and controlling vehicles
- 8.6. Problems when switching points and other accessories
- 8.7. Problems with s88 modules
- 8.8. Problems with the software update
- 8.9. Technical hotline
- 8.10. Repairs
- 9. Technical data
- 10. Warranty, EC Conformity & WEEE
tams elektronik
4.2.5. Digital central units for DCC and Motorola
Info
The interface "rec" receives track signals in DCC and Motorola format. It is therefore the
universal interface for connecting all DCC and MM digital central units with a track output (a
so-called "sniffer"). It is used to integrate disused digital central units as control and switching
devices into the EasyControl system.
Connection: 2-pole, grid dimension 2.54 mm. Tip: For the connection use e.g. the DCC
programming cable item no. 40-01009-01. This cable has a 2-pole socket which you can plug
directly onto the connection.
For the connection of e.g.
Märklin Control Unit 6020 and 6021
Märklin Central Station (from version 1)
Uhlenbrock Intellibox
Possible applications of DCC and Motorola digital command stations
You can use the central units, which you integrate into the digital system via the interface
"rec" (the sniffer),
to control vehicle decoders for Motorola, DCC and mfx (the latter in m3 format),
to switch accessory decoders for Motorola and DCC.
However, it is not possible to programme decoders or configure the digital system using the
digital central units.
Connections | 4.7