Instructions
Table Of Contents
- 1. Getting started
- 2. Commissioning
- 3. Your mc²
- 4. Connections
- 5. Configuring the system (Submenu "System")
- 6. Operation with the mc²
- 7. Updates
- 8. Checklist for troubleshooting
- 8.1. Heat generation
- 8.2. Automatic safety shutdown
- 8.3. Problems with the power supply
- 8.4. Problems with external input devices
- 8.5. Problems when programming and controlling vehicles
- 8.6. Problems when switching points and other accessories
- 8.7. Problems with s88 modules
- 8.8. Problems with the software update
- 8.9. Technical hotline
- 8.10. Repairs
- 9. Technical data
- 10. Warranty, EC Conformity & WEEE
tams elektronik
3.3. Virtual control devices
From the Toolbox, you have access to various virtual control devices to control your layout.
The virtual control devices are optimised for use with smartphones or tablets, but can just as
easily be used from the PC screen.
The HandControl.vi is similar
to the real HandControl.2
and can be used to call up
vehicles and switch functions
up to F9.
With the FunctionControl.vi
locomotives can be
controlled sensitively and
functions up to F32 can be
switched.
The SwitchControl.vi is
intended for switching
turnouts (or other stationary
components). The last
locomotive called up remains
under control.
With DriveControl.vi,
4 locomotives can be
accessed simultaneously.
The speed level can be set,
the direction of travel can be
changed and the F0 function
can be switched on and off.
Your mc² | 3.5