Instructions
Table Of Contents
- 1. Starten
- 2. Inbedrijfstelling
- 3. Youw mc²
- 4. Aansluitingen
- 5. Configuratie van het systeem (Submenu "Systeem")
- 6. Werking met de mc²
- 7. Updates
- 8. Checklist voor het oplossen van problemen
- 8.1. Warmteopwekking
- 8.2. Automatische veiligheidsuitschakeling
- 8.3. Problemen met de stroomvoorziening
- 8.4. Problemen met externe invoerapparaten
- 8.5. Problemen bij het programmeren en besturen van voertuigen
- 8.6. Problemen bij het schakelen van wissels en andere toebehoren
- 8.7. Problemen met s88 modules
- 8.8. Problemen met de software-update
- 8.9. Technische hotline
- 8.10. Reparaties
- 9. Technische gegevens
- 10. Garantie, EU Conformiteit & AEEA
tams elektronik
9. Technische gegevens
9.1. Digitale centrale mc²
Digitale protocollen
Gegevensformaten Motorola-I en -II
DCC (volgens NMRA en RCN standaard)
m3 (om mfx-decoders te bedienen)
Voertuig decoder adressen Motorola: 255 (1 – 255)
DCC: 10.239 (1 – 10.239)
m3: 16.384 (1 – 16.384)
Rijstappen Motorola: 14 of 27 (a of b)
DCC: 14, 28 of 128
m3: 126
Functies Motorola: function, f1 t/m f4
DCC: f0 t/m f31 of f32.768
m3: f0, f1 t/m f31
Accessoire decoder adressen Motorola: 1.020 (1 – 1.020)
DCC: 2.040 (1 – 2.040)
m3: ---
Feedback formaat RailCom
Interfaces
Voor het aansluiten van
externe invoerapparaten
Märklin-Can-Bus (10-polig)
LocoNet (RJ12)
EasyNet (RJ45)
XpressNet (RJ12)
Sniffer (2-polig, rasterafstand 2,54 mm)
Voor aansluiting van externe
terugmeldmodules
Märklin-Can-Bus (10-polig)
LocoNet (RJ12)
s88-N (RJ45)
max. aantal s88 modules:
52 s88 of s88-compatibele modules (832 contacten)
BiDiB (RJ45)
max. aantal BiDiB-knooppunten: 31 in één niveau
Computer interface LAN (RJ45) / TCP
Protocollen: BiDiB en p50x
Technische gegevens | 9.1