Instructions

tams elektronik

English RedBox

2.3. Digital formats

EasyControl is a multi protocol control system and capable to control vehicle and accessory

decoders of any manufactures compatible with these formats:

 Motorola I ("old" Motorola format)

 Motorola II ("new" Motorola format)

 DCC (complying to NMRA and RCN standards)

Moreover you can use the m3-format to control vehicle decoders designed for mfx-format.

Feedback data sent in mfx-format cannot be analysed by the digital system EasyControl.

EasyControl allows to operate vehicles with Motorola, DCC or mfx decoders in parallel.

You make the setting for whether operating solenoid accessory decoders in the Motorola or DCC

format either

 commonly for all connected decoders or

 seperately for a group of four decoders.

à Section 10. Background information

RailCom

EasyControl supports the feedback standard RailCom. EasyControl devices, mobile terminal

devices and the PC allow you to enter commands to read out the CV values of decoders

compatible to RailCom. In order to collect and analyse feedback data, you need special RailCom

detectors.

à Section 10. Background information

Decoder addresses , speed levels, switchable functions

Depending on the data format you have the following possibilities for controlling vehicle and

accessory decoders:

Motorola DCC m3

Vehicle decoder addresses 255 10.239 16.384

Amount of speed levels 14 or 27 14, 28 or 128 128

Functions

function (light)

f1 bis f4

f0 to f28

or to 32.768

f1 to f15

Accessory decoder addresses 1.020 2.040 –-

Seite 9