Instructions

tams elektronik
English RedBox
7. Update
Your RedBox and other EasyControl devices are state-of-the-art products, which are constantly
improved and adapted to occurring changes. To benefit from this development, you can update
the devcies to the newest software version.
Please note: All EasyControl devices used in one digital control system must have the same
software version! Otherwise malfunction of data transfer between the devices might occur.
You can download the most recent version of the software (firmware) for free from our
homepage (area "Download"). In order to perform the update, you need
 a PC running Microsoft Windows or Linux and internet access
 an USB cable (or when using the version "V24" a serial cable)
 Software "CV-Navi", which you can download from our hoemage for free
If you cannot or do not want to perform the update yourself, you can send us your RedBox to
update it. In case you use further EasyControl devices together with your RedBox, you have to
send them in for update as well. The update is free of charge, we only charge the return
expenses according to our valid price list.
Software-Update for your RedBox
First, download the firmware (i.e. the software running the RedBox) from our homepage on your
PC. You find the firmware under:
www.tams-online.de/download/firmware
Then, switch off the RedBox. Simultaneously pressing "stop" and "go" switch the power back on,
while holding both keys. The red LED on the front side of the RedBox flashes and the green LED
is off.
Now please connect the MasterControl to your PC and execute the update application.
Please note: Always connect the MasterControl to your PC before executing the update
application. Otherwise your PC might have difficulties detecting the interface.
Follow the instructions of the update application.
Seite 41