Instructions

tams elektronik
English RedBox
6. Operation
6.1. Switching on / off
Switching on your RedBox
After switching on the power supply for your RedBox, the connected booster(s) first have no
power, meaning that your track also has no power. The red LED in the "stop"-button is
illuminated.
Push the button "go" to switch on the boster(s). The green LED in the "go"-button is illuminated.
Switching off your RedBox
You can switch off all boosters by pressing "stop". If for instance two trains are about to crash,
you can stop the operation of your model railroad. Please note: The current speed levels and
function statuses are not discarded! As soon as you start operation again by pressing "go" all
active locomotives start moving as before.
Attention! Some locomotive decoders have additional power buffers, which can support a
locomotive when power is cut. Before operating such a decoder, please check how much
energy is stored and which of the locomotives is able to move without power, otherwise cutting
power to the booster(s) might not prevent a crash.
6.2. Plug and play
You can establish or interrupt connections of external devices or adapters to the EasyNet at any
time – even during ongoing operation (plug and play).
Seite 39