Instructions

tams elektronik
English RedBox
4.6.3. Driving and switching separately with one RedBox
You can configurate the integrated booster (for use as driving or breaking booster) that way,
sending digital commands to control accessory decoders will be suppressed. In doing so, you
prevent the transfer of vehicle commands being interrupted by sending commands for accessory
decoders. You need a PC (with program CV-Navi or control software) to set your RedBox to this
use.
Please note: The settings made for use as "standard booster" (driving booster) apply to all
external boosters as well. Basically, 4 different settings are possible. For most uses the following
setting makes sense:
Jumper set to B-Booster
+ no accessory commands to driving booster
This is the standard setting when sending commands for
vehicle and accessory decoders separately. The integrated
booster controls and supplies the accessory decoders, external
boosters are used to control and supply the vehicle decoders.
With this setting, it is possible to use the integrated booster as
a breaking booster as well.
Example of use: The integrated booster controls and supplies the accessory decoders. At the
interface for external boosters the accessory decoder commands are suppressed. The external
boosters tranfer driving commands for vehicle decoders only.
Seite 31