Instructions

tams elektronik
!
RedBox English
4.6. Integrated booster (versions "Booster" and "Booster-R" only)
Attention:
Be careful to allow the air to flow unhindered through the ventilation slits in the housing of the
RedBox, otherwise the integrated booster possibly overheats. Risk of fire! Make sure to keep
distance to other devices, walls, and similar when connecting your RedBox.
Technical specification of the integrated booster
Supply voltage Separate transformer or separate switching power supply, output
voltage depending on the set track voltage
Track voltage set
Output voltage of the transformer
AC voltage DC voltage
15 V 12 - 15 V 17 - 18 V
19 V 16 - 18 V 21 – 22 V
Output voltage 15 or 19 volts digital voltage (regulated)
Power consupmtion max. 48 watt
Maximum output current 2,5 A
Data formats
DCC, Motorola
mfx (vehicle decoder commands only)
Feedback log RailCom (RailCom cutout can be switched off)
Output signal symmetrical
LED display
A LED on the rear side of the RedBox shows the operating mode of the integrated booster.
→ Section 6.3.: LED display on the rear side
Seite 28