Instructions

tams elektronik
English RedBox
4.2. XpressNet interface
The XpressNet interface on the front side of the RedBox allows to connect a maximum of 16
XpressNet devices directly to the RedBox(e.g. Roco** Lokmaus 2 and 3, Roco** Multimaus,
handheld controllers by Lenz** and Massoth**) and to use them as external control devices.
Restrictions of the devices concerning the usable digital formats are overcome, e.g. you can
control vehicle decoders designed for Motorola or mfx format with pure DCC devices. In case the
number of speed levels defined for a decoder in the locomotive data base does not correspond
to the number of speed levels to be set at the device, the RedBox converts the speed levels
internally.
Please note, that with some devices the input options are restricted (e.g. number of switchable
functions, length of locomotive addresses, input of accessory decoder commands).
Figure: Connecting XpressNet devices
 Direct connection of a maximum of 16 XpressNet devices via the XpressNet interface.
 As an alternative or an addition, XpressNet devices can be connected via a XNControl
connected to the EasyNet interface.
Seite 23