Instructions

tams elektronik
RedBox English
Figure: Integrating PC and mobile terminal devices (here: via the integrated WLAN interface of
the RedBox version "Booster-R")
3.4.1. Overview PC- and WLAN interfaces of the central unit versions
PC interfaces WLAN interfaces
MasterControl one serial interface
(baud rate adjustable)
one USB interface with SiLabs identifier
external WLAN interface
required
RedBox "Basic"
RedBox "Booster"
USB-1 type Mini-B with Tams identifier
USB-2 type B with SiLabs identifier
external WLAN interface
required
RedBox "Basic-R"
RedBox "Booster-R"
USB-2 type B
with SiLabs identifier
integrated Raspberry Pi 3
preconfigured for EasyControl
RedBox "V24" one serial interface
(baud rate adjustable)
one USB interface with Tams identifier
external WLAN interface
required
3.4.2. Control software
Every software, which supports the Märklin** 6050 or P50X protocol is able to control your
RedBox or MasterControl.
In order to use a tablet or smartphone as a wireless control device, you have to install an app on
your mobile terminal device.
Seite 16