User manual

PZS-3 English
Page 33
EMC declaration
This product is developed and tested in accordance with the European
standards EN 55014-1 and EN 61000-6-3 and meets the EC - directive
2004/108/EG and legal requirements.
To guarantee the electromagnetic tolerance in operation you must take
the following precautions:
§ Connect the transformer only to an approved mains socket installed
by an authorised electrician.
§ Make no changes to the original parts and accurately follow the
instructions, circuit diagram and PCB layut included with this
manual.
§ Use only original spare parts if you have to repair the kit or the
ready-built module.
Operation overview
Please notice:
Pincipally, the shuttle-train control is not suitable for operation with
locomotives equipped with a decoder with automatic recognition of the
analogue mode.
The module controls the shuttle-train traffic between two terminus
stations of an analogue a.c. model railway layout. One additional stop
can be added in each direction of traffic between the terminus stations.
At the second terminus station points can be connected. This allows the
alternating traffic of two trains on the shuttle-train section.
The shuttle-train traffic runs automatically. The trains are slowed down
before reaching the terminus sections or the two stops as soon as a
track busy indicator integrated into the module indicates the train
coming into the respective section. The further course (braking, halting
and accelerating) is time controlled.