User manual

tams elektronik
!
FCS modules English
 LEDs for the vehicle´s lighting. Depending on the vehicle´s size and
construction use the following:
SMD LEDs type 0603, 0805 oder 1206 or
wired LEDs 1,8 mm;
 when connecting white LEDs as front lights to the modules FCS-1,
FCS-3 or FCS-4: 2 series resistors with 100 W.
2. Safety instructions
Caution:
Integrated circuits (ICs) are inserted on the module. They are
sensitive to static electricity. Do not touch components without first
discharging yourself. Touching a radiator or other grounded metal part
will discharge you.
Mechanical hazards
Cut wires can have sharp ends and can cause serious injuries. Watch
out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use
damaged parts: recycle and replace them with new ones.
Electrical hazards
 Touching powered, live components,
 touching conducting components which are live due to malfunction,
 short circuits and connecting the circuit to another voltage than
specified,
 impermissibly high humidity and condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:
 Never perform wiring on a powered module.
 Assembling and mounting the kit should only be done in closed,
clean, dry rooms. Beware of humidity.
Page 35