User manual

tams elektronik
English FCS modules
Checking the package contents
Please make sure that your package contains:
Module Additional components manual
FCS-1 1 --- 1
FCS-2 1 2
1
1
1
1
1
1
resistors 10 W
resistor 10 kW
light sensitive resistor
diode 1N4148
transistor BC 327
reed contact
dim switch DS-1
1
FCS-3 1 1
1
1
1
resistor 10 kW
diode 1N4148
transistor BC 327
reed contact
1
FCS-4 1 1
1
2
1
resistor 10 kW
diode 1N4148
transistors BC 327
loudspeaker
1
FCS-L 1 1 diode 1N4148 1
Required materials
For mounting and connecting you need:
 an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand;
 a tip-cleaning sponge;
 a heat-resistant mat;
 a small side cutter, a wire stripper and a pair of tweezers;
 electronic tin solder (0.5 mm diameter);
 connecting wire, e.g. enamelled copper wire;
Page 34