User manual

tams elektronik

English FCS modules

FCS-1 FCS-2 FCS-3 FCS-4 FCS-L

Front lights (white LEDs) + + + + +

Back lights (red LEDs) + + + + +

Brake lights - + + + -

Dim switch DS-1 - + - - -

Flashing lights

(blue or orange LEDs)

+ (5) - - + (2) -

Warning lights

(yellow LEDs)

- - + - -

Siren (loudspeaker) - - - + -

Motor / acceleration delay - + + + -

Motor / braking delay - + + - -

Front lights

All modules offer the possibiliy to connect white LEDs as front lights.

When connecting white LEDs as front lights to the modules FCS-

1, FCS-3 and FCS-4 you have to mount additional series resistors

(recommended value: 100 )!

Back lights and brake lights

It is possible to connect red LEDs as back lights to all modules. With the

FCS-1 the red LEDs can be connected directly to the vehicle´s

accumulator battery, they do not have to be controlled by the module.

With the FCS-2 to FCS-4 the red LEDs of back lights are switched

brighter when stopping. When connecting an additional reed contact to

the FCS-2 or FCS-3 (in order to realise a braking delay) the LED will be

switched brighter during the whole brake application.

Page 40