Instructions

tams elektronik
English MT-1 | MT-2 | MT-3
Checking the package contents
Please make sure that your package contains:
 one kit, containing the components listed in the parts list and one
PCB:
MT-1  page 17
MT-2  page 18
MT-3  page 19
 or one ready-built module
 or one ready-built module in a housing (complete unit).
Required materials
To assemble the kit you will need
 a soldering iron with temperature control and a thin tip and a deposit
stand or a controlled soldering station
 a scraper, rag or sponge
 a heat-resistant pad
 a small pair of side cutters and wire strippers
 tweezers and flat-nose pliers if necessary
 electronic solder (preferably 0.5 to 0.8 mm diameter)
For testing the module you need an electric light bulb.
In order to connect the module you need wire. Recommended
diameters: > 0,14 mm² for all connections.
In order to activate the circuit you need :
MT-1
push-button
e.g. push-button item no. 85-5212x, x=1,2,3,6,7
MT-2
switch
e.g. toggle switch 1xUm item no. 84-51510
MT-3
push-button
e.g. push-button item no. 85-5212x, x=1,2,3,6,7
Seite 4