Operation Manual

GB-10
USING USB DEVICES AND SD/MMC MEMORY CARDS
Press the MODE/VOL/PWR OFF button to select USB/SD/MMC mode. When a USB device and a SD/MMC card are both
connected, the unit will automatically play the last source. Press the BND/AS button to select USB or SD/MMC mode.
For more details on playback operations, refer to the section “MP3/WMA FILES OPERATIONS”.
Notes:
- When a USB device or a memory card is being played, please do not touch it or remove it. Select another mode first.
- If the unit cannot read the source even though you have followed the instructions above, please check that the USB device
or card is in good condition. You can also take out the device and insert it again.
- It is recommended to use the USB adaptor cable.
- This unit can only support standard USB memory devices.
- USB MP3 players are not necessarily considered as standard because different brands or different models may have their own
standards, which is why this car audio may not support all MP3 players.
- When connecting an MP3 player containing one or more normal batteries (non-rechargeable batteries), you should remove
the battery/batteries from the MP3 player before connecting it to the USB port. Otherwise, the device may be damaged.
PLAYING MP3 FILES
Playing/Pausing
- During playback, press the button to interrupt playback. Press again to resume playback.
Playing the previous/ next track
- During playback, press the , button to play the previous/next track. Press and hold the button to fast search the
previous/next tracks.
Go to the previous / next directory
During MP3/WMA mode, press the or button to select the previous or next directory. If the source does not contain any
directories, this function will not be available.