Instructions / Assembly

UNIT PARTS & DIMENSIONS

Fan Assembly

AirDoor

Flexible

Acoustic

Duct

Fan Cone

Page 3

SUPPLIES INCLUDED IN THE BOX

Prior to beginning installation, please verify all of the following items were recieved:

• Box 1 of 3: AirDoor and mounting kit, including mounting flanges, 16 assembly screws, and 24 ft. of

aluminum tape; Control package including Digital Touch Controller, mounting bracket, 2 white, flat-head

faceplate screws, and 50 ft. red CAT5 cable; White cube-core grille with 8 white wood screws; Installation and

Operation Manual, green “Theory of Operation” insert, and blue “Warranty Card.”

• Box 2 of 3: Fan.

• Box 3 of 3: 7 ft., 20" diameter flexible acoustic duct; fan cone; 20 ft of aluminum tape; 20 ft. of 1¾”

polypropylene webbing; 6 collar screws.

In addition to the included items listed above, the following tools and supplies are required to install the fan:

• Lumber matching dimensions of the attic joists (e.g. 2"× 6", 2"× 8", etc.) and cut to t according to this manual’s

INSTALLATION: FRAMING section, as well as any additional supplies needed to frame the fan’s rough opening.

• Cordless drill with phillips-head screwdriver and miscellaneous drill bits.

• At least 16 wood screws (1½" min. length) and washers sized to t.

• Socket wrench with ¼" and 9/16" sockets or standard wrenches in the same sizes.

• Phillips and at-head manual screwdrivers.

• Drywall Cutter.

• High quality latex caulk.

• If your home’s framing is 16" on-center, you will also need a hacksaw or dremel tool to notch the ange of the

cube-core grille according to the instructions in the INSTALLATION: FRAMING section.

REQUIRED TOOLS & SUPPLIES NOT INCLUDED

26¼"

22¼"

14¾"

Tamarack HV5500G Whole House Fan Installation Manual, P/N HV5500G.1