Instructions / Assembly

SAFETY INFORMATION

• Never operate this fan without a window or door opened.

• This fan is meant for general ventilation. DO NOT USE THIS FAN TO VENTILATE PARTICLE-LADEN

AND/OR EXPLOSIVE MIXTURES OF AIR.

• Do not use this fan for kitchen ventilation.

• Before installing or servicing this fan, disconnect it from power to reduce the risk of damaging

circuitboards,re,electricalshock,orinjury.

• Install this fan in accordance with this manual and all local codes and standards.

Some of the principles of this product’s safe installation and operation

are not immediately obvious. Read the following safety information

before continuing further:

ELECTRICAL REQUIREMENTS

This fan requires a 120 volt uninterrupted electricity supply. We strongly recommend providing a dedi-

cated circuit for this fan.

This fan has a factory-installed, 10 ft. power cord that origniates at the fan-mounted electrical box. Consider this

length when choosing a location for this fan. Depending on the location of existing outlets in the attic, the installation

of an additional outlet may be required.

All wiring and connections must be made according to this manual and acceptable wiring standards. All

local codes must be followed. Consult an electrician if necessary.

This fan’s aluminum construction is corrosion-resistant and extremely durable. However, this fan should never be

handled using any of the aerodynamc brackets that mount the motor within the assembly. These brackets are high-

lighted in the illustration below. Always handle this fan by either its external casing or the motor itself. You can also

handle this fan by its hanging straps, but be careful as their edges are sharp.

HANDLING INSTRUCTIONS

NEVER handle the

fan using any of

these brackets.

Page 2

Tamarack HV5500G Whole House Fan Installation Manual, P/N HV5500G.1