Specs

amarack Solar
Products
am
P
r
The STP-LCR/82R is designed and engineered for two 60 or 72 cell
modules that are less than 41” wide.
2 MODULE
POLE TOP MOUNT
STP-LCR/82R
- Mounts on a user-supplied 4” schedule 40
steel pipe
- Manufactured using pre-galvanized steel and
heavy-duty corrosion resistant 5000 series
aluminum.
- Tilt angle is easily adjustable in 10° incre-
ments from 0° to 60° from horizontal
- IN STOCK for quick shipment
 e tables below show the design wind speed for various module tilt angles and maximum snow loads and re-
quired footing depths for the mounting pole. If you need the mount to be certi ed for a wind speed or tilt angle
outside of this range, use our high-wind version: STP-LCR/82HW
- Fits modules with mounting hole spacing of 20.95” to 58.68”.
- Easily installed and adjusted by a single person
- Stainless Steel Hardware
- Total shipping weight is 54 pounds in two boxes - UPS Ground
shippable
- Certifi ed for up to 120 mph wind speeds
Design Win
d
ASCE 7-10
MPH 18" 30" 18" 30"
110 60 or 72 60 or 72 60 or 72 60 or 72
0q
4.00 3.50 3.75 3.25
130 60 or 72 60 or 72 60 or 72 60 ONLY
10q
4.00 3.25 3.50 3.00
150 60 or 72 60 or 72
20q
4.75 4.00 4.25 3.50
110 60 or 72 60 or 72 60 or 72 30° 5.25 4.25 4.50 3.75
120 60 or 72 60 or 72 60 ONLY
40q
5.75 4.75 5.00 4.00
20°
115 60 or 72 60 or 72 60 or 72
50q
6.75 5.50 5.75 4.75
30°
105 60 or 72 60 or 72 60 or 72
60q
6.75 5.50 5.75 4.75
40°
105 60 or 72 60 or 72 60 or 72
50°
110 60 or 72 60 or 72 60 or 72
60°
105 60 or 72 60 or 72 60 or 72
0°
10°
TILT ANGLE
Ground Snow Load Footing Depths
Module
Tilt
Angle
0 psf 10 psf 20 psf 30 psf
Soil Type Class 5 Class 4
Footing Diameter