Series Installation Guide
STP Mount
Series
2
Tools Required
Tools that support the following size Hex heads: Torque values are “dry”, add 15% if using anti-seize
lubricant on
Stainless hardware (Recommended). A deep socket or short extension needed for 3/8”, in one location.
1. 3/8”= 240\20 In\Ft Lbs
2. 5/16”= 144\12 In\Ft Lbs
3. 1/4"= 84\7 In\Ft Lbs
Components List
The following parts are for all the STP mount models:
Galvanized coated sheet steel components will show rust on cut edges and is normal and will not affect
the
structure and function of the mount.
COMMON TO ALL STP MOUNTS, STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090, STP-LCR/120
PART
NUMBER
DESCRIPTION
QTY.
51-04PC-012
6" Strong Back Pipe Clamp Half
2
51-04CH-012
Clamp Strong Back Cap
1
51-04BC-TLT
Channel, Tilt Plate Mounting
2
51-04TP-LR2
Tilt Plate L/R
2
23-2520-050
Bolt, 1/4-20 x .75 SS
20
Qty's Vary by model
25-2502-000
Washer, flat 1/4 SS
20
Qty's Vary by model
25-2501-014
Nut, Flange Serrated 1/4-20 SST
20
Qty's Vary by model
27-0456-700
Rod, threaded, SST 5/16-18 x 7" long
4
23-3118-875
Bolt, Hex 5/16-18 x .875 SST
4
25-3102-000
Washer, flat 5/16" SS
4
25-2501-015
Nut, flange 5/16 SST
20
23-3716-100
Bolt, 3/8-16 x 1.0 Hex SST.
10
Qty's Vary by model
25-3702-000
Washer, Flat 3/8" SST.
20
Qty's Vary by model
25-3701-000
Washer, lock 3/8" SST.
10
Qty's Vary by model
24-3716-440
Nut, 3/8-16 Hex SST.
10
STP MOUNT SPECIFIC
PART
NUMBER
DESCRIPTION
QTY.
MODEL
51-04CR-048
Cross Rail, 48"
2
STP-SCR/045, STP-SCR/060, STP-SCR/070,
51-04CR-060
Cross Rail, 60"
2
STP-LCR/090
51-07CR-058
Cross Rail, 58"
2
STP-LCR/120
51-04TC-045
Panel Support, STP 45"
STP-SCR/045, (2) STP-LCR/090 (4)
51-07TC-060
Panel Support, STP/LTP 60"
STP-SCR/060,(2) STP-LCR/120 (4)
51-07TC-070
Panel Support, STP/LTP 70"
2
STP-SCR/070
51-07CN-030
Connector, 30"
2
STP-SCR/090, STP-LCR/120
51-04CB-225
Backing Channel
4
STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090
23-3118-901
Bolt, 5/16-18x2.50 Hex CS Zinc
4
STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090
25-3102-001
Washer, flat 5/16 Zinc.
8
STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090
25-3101-001
Washer, lock 5/16 med split Zinc
4
STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090
24-3118-441
Nut, 5/16-18 fin hex Zinc.
4
STP-SCR/045, STP-SCR/060, STP-SCR/070, STP-LCR/090