Series Installation Guide

STP HW Mount Series
1
Table of Contents
Introduction ...................................................................................................................................................1
Customer Support ..........................................................................................................................................1
Tools Required ...............................................................................................................................................2
Components List ............................................................................................................................................2
Pre Assembly for Models STP-LCR/82HW STP-LCR/124HW ...........................................................................3
Step 1: Connecting Panel Support Channels (STP-LCR/124HW only) ..............................................................3
Step 2 Connecting inner\outer brace channels ..............................................................................................3
Step 3: Connecting Panels to Panel Supports ................................................................................................3
Final Assembly ...............................................................................................................................................3
Step 4: Attach Pole Clamp Assembly to Pole ...................................................................................................3
Step 5: Attach Tilt Plate Mounting Channel ..................................................................................................4
Step 6: Attach Tilt plates ...............................................................................................................................4
Step 7: Attach Cross Rails to Tilt Plates. .........................................................................................................4
Step 8: Attach Panel Support Sub Assembly to Cross Rails ................................................................................4
Step 9: Install Knee Brace Cross rail
STP-LCR/82HW STP-LCR/124HW .............................................................4
Step 10: Adjust Tilt Angle ...............................................................................................................................4
Step 11: Install Lower Vee Brace
STP-LCR/82HW STP-LCR/124HW ..................................................................5
Detailed Diagrams for Assembly ....................................................................................................................5
Foundation Hole Guidelines (see chart page 14) .............................................................................................. 12
Footing Chart 2 panel STP-LCR/82HW ................................................................................................
............ 14
Footing Chart 3 panel STP-LCR/124HW .......................................................................................................... 15
Installer Responsibility ................................................................................................................................. 16
Warranty Information ................................................................................................................................... 16
Introduction
The Top of Pole Mount is an extremely sturdy, universal pole mounting solution for small area solar
photovoltaic (PV) needs. With its user adjustable angle settings (0° to 60° in 10° increments), the Top of Pole
Mount can support installations in a wide
range of locations.
Customer Support
Tamarack Solar makes every effort to ensure your m ounting kit is easy to install. If you need assistance at any
point in your installation or have suggestions on how
we can improve your experience, call customer support
at 1-800-819-7236 or email us