Manual

IP Camera User’s Manual
|
Fig 33
Click button to pop up a warning window, click OK button, all device
parameters will be reset as factory default settings and then the device will reboot automatically, click
Cancel button to exit the warning window.
Click button to pop up a warning window, click OK button, all device
parameters will be reset as default settings and then the device will reboot automatically, click Cancel
button to exit the warning window.
Note: “Factory Default” contains restore the network IP of IP Camera, but “Restore” does
not contain this function.
5.11.3 Restart Device
The interface of restart device is shown in Fig 34:
Fig 34