User guide

※ How to set ID

① Before setting up IR remote ID, Enter the GENERAL SETUP and select the unit ID. (Default is 0)

② While pressing and holding the ID button, enter the unit address of the DVR.

③ If the unit address is a single digit, enter two digit number by adding the number 0 as the first digit.

( Example – If the unit address is 1, the input value is 01.)

※ A single remote controller can change ID from 0 to 19 and independently control up to 20 DVRs.

RECORD

ROTATE

DISPLAY

ESC

LOCK(LOG-OUT)/ REPEAT

NUMBER

PTZ PRESET

PTZ IRIS

▲ Direction Key /Panorama Play

ENTER

▼ Direction Key /Smart Play

▶ Direction Key / Play

Fast Reverse Play/

PTZ

Fast Forward Play / PLAY

◀ Direction Key /

Reverse Play

3.3 Remote Controller

PAUSE

BACKUP

PTZ ZOOM

PTZ FOCUS