Manual

※ The user can view an image on full screen by double-clicking a desired channel in the 4/9/16 Sub-Screen

mode. Double-click any part of the screen to return to the previous mode.

※ Auto Sequence

Auto Sequence is to rotate images at an interval of the certain time in 1/4/9 Basic Division. Auto Sequence

is not available in the Basic 16 Division mode.

① Move to {Menu}  {Miscellaneous}  {Display Setup }.

② Pressing Front {SELECT} Button / Remote Controller {SELECT} Button / Mouse Arrow Button initiate the

Auto Sequence mode.

③ Auto Sequence in Basic 1 / 4 / 9 Division Mode

●●●

1 162 3

1 Channel Mode Sequence

4 Channel Mode Sequence

9 Channel Mode Sequence

５-３-２Spot

Spot is to output a channel that is set with a certain function and Spot has an independent monitor and output.

The priority for Spot is Manual Spot > Event Spot > Sequence Spot.

① Manual Spot

The user can designate a spot channel manually.

H-model 16CH supports 4ea Spot channels and H-model 8channel support 1ea Spot channel.