Manual

66
[Figure 6-59. Setup iSCSI Window2]
④ {Storage} -> {iSCSI} Tab, the registered iSCSI Storage will be displaced, and can be used for
‘Recording’ purposes only.
⑤ When the ‘Status’ is shown as ‘Unusable’, this means that another DVR is currently using the
storage. The DVR’s Mac Address will be shown in ‘DVR Addr’.
※ Please note that ‘speeds’ will vary on the ‘network environment’.
※ Network of over 100Mbps is highly recommended.
※ Only 1 ‘iSCSI Target’ is supported
※ Within the ‘iSCSI Target’, many Lun(HDD) can be registered, but when in use, 1 DVR
will use 1 Lun(HDD) at a time.
６-７ System
[Figure 6-60. System Setup Window]