Manual

56
６-２ Camera
[Figure 6-48. Setup / Camera Menu]
６-２-１ Camera
① Connection
Used to set whether to connect or disconnect each camera channel.
※ When the camera channel is set to disconnected, the video contents will not be
displayed even if the camera is actually connected.
② Title
Name each camera. Max. 20 letters are available.
③ PZ Mask
Used to hide a certain area of the real-time monitoring screen. After selecting PZ Mask over each channel, it
becomes the 1 channel division mode and designate sections where you don’t want to monitor.
④ Adjust
Adjust Brightness/Contrast/Color/Saturation/Sharpen/Camera.
６-２-２ PTZ
Setup the protocol and baud rate of the PTZ Camera.
６-２-３ POS
Setup the protocol and baud rate of the POS device.
６-２-４ Event Source
Select {Menu}  {Setup}  {Camera}  {Event Source}.
(1) Motion Area
The user can setup the motion detection area. Area setup related to motion can be decided.