Manual

※ The user can view an image on full screen by double-clicking a desired channel in the 4/9/16 Sub-

Screen mode. Double-click any part of the screen to return to the previous mode.

※ Auto Sequence

Auto Sequence is to rotate images at an interval of the certain time in 1/4/9 Basic Division. Auto Sequence

is not available in the Basic 16 Division mode.

① Move to {Menu}  {Miscellaneous}  {Display Setup }.

② Pressing Front {SELECT} Button / Remote Controller {SELECT} Button / Mouse Arrow Button initiate the

Auto Sequence mode.

③ Auto Sequence in Basic 1 / 4 / 9 Division Mode

●●●

1 162 3

1 Channel Mode Sequence

4 Channel Mode Sequence

9 Channel Mode Sequence

５-３-２ Channel Grouping

Channel Grouping is to switch the image location in the screen between channels in the monitoring mode.

① On the real-time monitoring screen, select {Menu}  {Miscellaneous}  {Channel Grouping}.

② Select a channel to be switched after moving a yellow-focused selection window.

③ Select a channel to be switched when the window shows.

④ The Image location of the each channel is changed.

５-３-３Spot

Spot is to output a channel that is set with a certain function and Spot has an independent monitor and output.