Instruction Manual

Digital Video Recorder User Manual
69
In the Upgrade interface, user can remotely upgrade the device system.
You can also reboot the device.
6.4.3 Remote Check Information
The system records the work status and operating procedure automatically. User can
check the information about system, event, log, network and online users.
Enter into INFOLog; user can set the start & end time and log type, press “Search”
button to search the log records. As shown in the figure below:
Remote Log Search
Note: The log records are saved in the HDD. It will not have any record if HDD
has not been installed. There is no limit on the number of log files, but only with
regard to the storage space of hard disk.