Instruction Manual

Digital Video Recorder User Manual
42
4.9 P.T.Z Configuration
Enter into Main MenuSetupPTZ. P.T.Z configuration includes two submenus:
serial port and advanced.
4.9.1 Serial Port
Refer to Fig 4-42, enable P.T.Z control of any channel; select the correct PTZ settings
according to the external communication device, the meaning of PTZ parameters is
shown in the table below. Select “all” and then do relevant setup, user can set all
channels with same parameters.
Fig 4-42 P.T.Z configuration-serial port
Click “Default” button to restore the default setting; click “Apply” button to save the
setting; click “Exit” button to exit current menu.