Datasheet

User guide Menu
47
Menu handling
Key functions You can navigate in the current menu using the three keys of the con-
trol panel.
USER 1 key In menu mode the USER 1 key has the following functions:
Press the USER 1 key to return to the previ-
ous parameter group or parameter on the
same menu level.
The USER 1 key is also used for changing pa-
rameter settings (see also STOP/EJECT key,
page 48).
If this key is pressed when the first parameter
group or parameter of the respective menu
level is active, the following message appears
on the LCD display:
Pressing the USER 1 key again will open the
last parameter group or parameter of the same
menu level.
By pressing the STOP/EJECT key you will
return to the previous menu layer (see also
STOP/EJECT key, page 48).
USER 2 key In menu mode the USER 2 key has the following functions:
Press the USER 2 key to select the next
parameter group or parameter on the same
menu level.
The USER 2 key is also used to change
parameter settings (see also STOP/EJECT key,
page 48).
If this key is pressed when the last parameter
group or parameter of the respective menu
level is active, the following message appears
on the LCD display:
MENU
USER
SETUP
USER1
STOP
/EJECT
USER2
PAPER
Return to
Prev. Layer
SETUP
USER1
STOP
/EJECT
USER2
PAPER
MENU
USER
SETUP
PAPER
USER1
STOP
/EJECT
USER2